29.3K
Followers
1,827
Following
971
Posts
N/A
Reels
10
Highlights
5/7
Photos/Videos in last 12
Bio
➡️ busycircuits.com 🆘 busycircuits.com/support 🛍 busycircuits.com/shop 👇👇👇👇
Links
linktr.ee/Busy-
Avg likes
-
Avg comments
-
Engagement
0.2/wk
Posting
Likes and comments are still being collected for this account. Check back shortly.
#almbusycircuits#eurorack#fmsynth#pamelasproworkout#pamelasnewworkout#compressor#mixer#update#firmware#download
Recent posts
「 WITH MIXER 」🎚️Announcing ALM051 - ‘With Mixer’ A companion expander for the ALM Stem Ripper, adding a full-featured 8-channel stereo mixer with per-channel level and gain control, stereo panning, dual stereo aux sends, and mute and solo controls. In stock and available NOW from your favourite ALM stockist!
With Mixer connects directly to the Stem Ripper, adding an easy-to-use graphical interface that provides visual monitoring of all eight input channels and the stereo mix output, along with quick, precise control of all mix parameters. Mix parameters can also be controlled via CV or an external MIDI controller connected to the powered USB host port, providing hands-on control and making the With Mixer well suited to live performance. Complete mixer setups can be saved and recalled, while the display also shows the Stem Ripper's recording status and elapsed time. 🔴
Together, the 'Stem Ripper With Mixer' pair provides a modern multitrack stereo digital mixing and recording setup for your Eurorack system in just 14HP. Check out the full demo of the pair on the ALM TV Youtube channel. For more info see link in bio. 🔗
#recorder #digitalmixer #eurorack #almbusycircuits #mixing
11 Sep 2026
Announcing ALM047: QUAID GIGASLOPE ⛷️ Our new 13-stage four channel multi-mode modulator that builds on the hands on, menu free and jam friendly design of our original Megaslope module.
Also announcing ALM045: FMco - Compact FM Synth Voice. Both modules available now and shipping from ALM stockists worldwide and directly via the busycircuits site.
The QUAID GIGASLOPE is a four channel multi-mode modulator, with each channel outputting a variable staged slope that can act as a complex envelope, flexible LFO, or step sequence. Each slope can contain up to 13 stages, which may be independent or overlap with other stages. Slopes can be triggered or run freely, with both manual and CV control over each stage’s level, duration, and curve. The output range of each slope can be set and optionally quantised to musical scales. Trigger outputs are available at the end of each stage and at the completion of a slope. The QUAID GIGASLOPE builds on our earlier Megaslope module, expanding the idea of a hands on, menu free, jam friendly complex modulator.
The FMco is a compact FM synthesis based VCO and voice. It features our own original 2-operator FM synthesis DSP implementation inspired by our ‘Akemie’ modules but tuned for more immediate use and a more modern sound. It includes control over FM Index, Ratio and a selection of classic operator waveforms as well as chords and a built in decay envelope, delivering a large amount of FM synthesis all in just 8HP.
Both modules available NOW, for more information see links in bio. 🔗
#almbusycircuits #sequencer #envelope #fmsynthesis #eurorack
20 Mar 2026
Announcing ALM049: Pamela’s Disco 🪩 Pamela’s Disco syncs Eurorack modular and other compatible devices to the ‘Master’ Tempo of a PRO DJ-LINK™ Network. This enables syncing your modular to your decks for unique hybrid DJ sets.
The Disco listens to a PRO DJ-LINK™ network via an Ethernet connection and converts the ‘Master’ tempo information to standard modular clock signals. Easily sync Pamela’s PRO Workout and other devices with your mix.
The Disco provides standard ‘DIN Sync’ style clocking outputs as well as beat and bar trigger outputs. LEDs show connection, status and tempo. A ‘Resync’ button provides manual latched beat synced control of the outputted clock.
Compact and easy to set up, the Disco opens up new performance possibilities - mix, overdub, spinback and scratch, all locked in time with your modular.
The Disco is shipping NOW and available from ALM stockists worldwide and directly via our website. 🕺
For more info see link in bio. 🔗
#dj #cdj #pioneer #prodjlink #pamelasdisco #pamelasdiscotheque #pamelasproworkout #pam #pamelasnewworkout #sync #eurorackmodular #eurorack #new #modularsynth #xdj #performance #live #techno #house #dancemusic #busycircuits #almbusycircuits
04 Dec 2025
「 With Mixer Compressor 」✨Compressing a full mix with the With Mixer’s new master bus compressor available now in firmware v102! Link in bio to update. 🔗
A full track is mixed with the Stem Ripper With Mixer combo and the new bus compressor is engaged to add punch and glue to the mix. The threshold is adjusted and the four compressor intensity settings are tested out including light, medium, heavy and extreme. Each setting alters the attack and release behaviour of the compressor for a simple setting that quickly changes the sound.
🧑💻Updating your With Mixer is easy, connect the module to a computer via USB-C and power it on with the back button held, then copy the firmware file across. You can grab the update from the busycircuits site (link in bio.)
#compressor #mixer #update #firmware #download
10 Nov 2026
「 With Mixer Update 」🆕 With Mixer Firmware v102 is now available, adding a stereo master bus compressor for adding punch and glue to live mixes. Grab the update from the With Mixer webpage on the busycircuits site.
🚌 The bus compressor features four intensity settings: light, medium, heavy and extreme, altering the attack and release behaviour of the compressor with four quick settings. The amount of compression is then adjustable with a simple threshold parameter, making it easy to add punch and glue to live mixes! Note the compression is not recorded to the Stem Ripper’s mixdown.
Updating is easy, connect the With Mixer to a computer via USB-C and power it on with the back button held then copy the firmware file across. You can grab the update from the busycircuits site (link in bio.)
#compressor #mixer #update #firmware #download
06 Nov 2026
「 Digi-PCM Lo-fi 」Using the Digi-PCM’s bandwidth and modulation controls to add a lo-fi flanging and texture to an ambient lead voice.
How to create Lo-fi flanging:
👉 Decrease time control to 1ms
👉 Adjust bandwidth to 6kHz
👉 Increase Mod Depth to 40-50%
👉 Adjust Regen to increase the flanger resonance
The Digi-PCM Echo is available for your DAW as part of the MFX Plugins Bundle alongside 10 other unique FX plugins. For more information on the Plugin bundle and sound demos see link in bio.
#plugin #software #vst #daw #delay
04 Nov 2026
「 Pam Phase 」🌕🌔🌓🌒 Quickly creating a phaser with 4x MCF’s using the new ‘Copy To All’ option on Pamela’s PRO Workout to build a quadrature LFO that sweeps their frequencies.
Starting with a droning chord from the MCO patched to 2 MCF x2’s output 1 of the Pam is set up to produce a /8 sine wave LFO. The settings are then copied to all 8 outputs using the new Copy menu added in firmware v131. Pam’s clock is started, modulating all 4 MCF bandpass filters simultaneously. Finally, the ‘Phase’ of outputs 1-4 is set to 0%, 25%, 50% and 75% respectively, creating a quadrature LFO. The result is a phaser like effect as the 4 bandpass filters are continuously modulated with a phase offset from one another.
#phaser #filter #chord #pamelasproworkout #pamelasnewworkout
03 Nov 2026
「 MFXP Akemie Poly 」💾 Briefly exploring presets of the FM-based Akemie Poly voice engine included in the MFX Pedal.
🏯The ‘Akemie Poly Voice’ is a polyphonic 2 operator FM voice inspired by our ‘Akemie’ FM modules and plugins. Controls let you define the wave, FM depth, ratio, and feedback, with independent decay envelopes for FM and amplitude as well as an end of chain low pass filter. The 4 voice synth engine is MIDI controlled with the same freely assignable CC and expression control just like the other FX engines. Here we scroll through the built in presets covering a range of timbres the synth voice can produce.
The poly voice is exclusive to the Pedal MFX, there are no plans to add to the MFX module.
#fmsynth #pedal #midi #synthesizer #digital
01 Nov 2026
「 Super Castles Beat 」💫 Creating a kick, clap, hihat, and synth voice with 2 Akemie’s Castles modulated and sequenced by the QUAID GIGASLOPE.
The pair of Castles are set up primarily as percussion voices with the final voice used for a sequenced bass line. The sequencing and modulation are coming from both the Pamela’s PRO Workout and Gigaslope.
Top Castle -
👏 Osc A produces noise for the clap sound with maximum layered detune from the chord knob and full FM depth from operator 1 > 2. Its level and pitch are then modulated by a unique ‘clap’ envelope built on the Gigaslope with 3 rippled decay/release stages that imitate the flam of multiple hands clapping.
🧢 Osc B also generates noise with a more metallic tone, tuned high for FM aliasing which acts as a perfect source for analog style hi-hats. Both a closed and open hihat are made with the same source by modulating the VCA level from a short envelope and a square wave offset added for the open hat.
Bottom Castle -
🦵 Osc A produces a kick sound with a short envelope from Pam patched to both the V/Oct pitch input and operator 1 depth which adds FM at the start of each hit for a sharper click. The VCA level is then modulated by the new smooth square wave from Pam.
🗣️ Osc B acts as a synth voice with 2 layers, one an octave up saw wave and the other an octave down sine with feedback. The Gigaslope produces a pair of envelopes that are patched to each layer’s level as well as a quantised 6-step pitch sequence that sequences the pitch. The envelopes share the same controls as the clap’s release and all are lengthened simultaneously to elevate the energy of the patch with a single gesture. The feedback is also increased to brighten operator 3 and transform its sine wave into a noisy saw.
#drumsynth #synthesizer #musicproduction #drummachine #fmsynth
30 Oct 2026
「 Motto Akemie Beats 」🥁 Using the Motto Akemie plugin to layer percussion and FM tones with a drum break.
Starting with a drum loop, a kick, snare and hi hat are added via the Motto Akemie’s built in step sequencer. Next, tonal plucks and a noisy hit are added on tracks 4, 5 and 6. The ratio and wave settings are then adjusted on voice 4 and its pattern is randomised, creating a different rhythm.
Motto Akemie is available for purchase for $40 for macOS and Windows. Downloads run fully functional for 7 days before requiring a license key purchase so you can try before you buy. Link in bio.
#plugin #drummachine #daw #almbusycircuits #fmsynth
28 Oct 2026
「 Busy Patching 」☁️ Our Soundcloud playlist is continuously updated with our favourite and extended versions of patches featured both here on IG and on Youtube. 👩💻
All patches were made with pretty much 100% ALM, please enjoy our ‘Busy Patching’ playlist - Soundcloud link in bio. 👉
#music #soundcloud #musicproduction #almbusycircuits #synthesizers
27 Oct 2026
「 SQUID CHORD STRUM 」🪕🦑 Creating a ‘strummed’ chord progression with the Squid using the ‘Steps’ parameter + triggering from the ratchet wave on Pamela’s PRO Workout.
👉 A single kalimba sample is triggered on channel 6 of Squid. By holding ‘Chan’ + twisting the encoder from the channel page, the sample data from channel 6 is referenced by channels 7 & 8, effectively making 3 copies of the kalimba sample.
👉 Returning to channel 6, the ‘Steps’ parameter is increased to 3, creating a round robin triggering across channels 6, 7, and 8.
👉 Quantisation is then enabled on channels 6, 7, and 8 to get the chord in tune.
👉 Switching to Pam’s, the Shape is set to the x4 ratchet wave and the width is decreased to only allow through a burst of 3 triggers.
👉 Euclidean is enabled to reduce the frequency of the output triggering.
👉 Finally, a quantised pitch sequence is duplicated via Beast’s Chalkboard to all 3 Squid channels, creating a chord progression.
#squidsalmple #polyphonic #polyphony #chord #almbusycircuits
25 Oct 2026
Follower tracking
We have started recording @busycircuits, but only 1 observation so far — not enough to show a trend yet. Track it daily →
Download @busycircuits's data
Everything below is derived from this account, priced on the counts shown. Delivered as CSV by emailed link.
You only pay for rows we deliver. Counts are the maximum available today; if an export comes back smaller, the difference is refunded automatically. Counts as last collected 5 hours, 49 minutes ago.
Tracking
A monthly plan, not a download: we keep reading @busycircuits and email you what changed.
Other reports
Not downloads of this account: they take their own inputs.
Similar accounts
Accounts we track that share hashtags, mentions or bio topics with @busycircuits.
@maxabelmax
1,032 followers
Also uses #sequencer
@behringer
239.7K followers
Also uses #pedal
@beatlab
1,030 followers
Also uses #cdj
@domonogood
4,077 followers
Also uses #new
@midnightfury_official
6,209 followers
Also uses #midi
@__harrisxn__
7,792 followers
Also uses #dancemusic
@samkhillmusic
1,037 followers
Also uses #download
@alifine
1,268 followers
Also uses #midi