263.8K
Followers
1,195
Following
6,207
Posts
N/A
Reels
1
Highlights
6/6
Photos/Videos in last 12
Bio
🇺🇸The 18th annual Born-Free Motorcycle Show is June ••• at Oak Canyon Ranch in Silverado Ca.
Links
linktr.ee/bornfreeshow-
Avg likes
-
Avg comments
-
Engagement
9.8/wk
Posting
Likes and comments are still being collected for this account. Check back shortly.
Recent posts
#bf18invitedbuilder @nathantsykes -
I’ll be missing for a while.. see you on the grass in June! Can’t wait to see everyone’s bikes 💪
#bf18 #bornfree18 #bornfreemotorcycleshow #bornfree
🎥 @aubriannasykesb
14 Nov 2026
Quick intro for Born Free! Im PanheadEric, I’m a CNC machinist in my 9-5, and a professional amateur on weekends. Born Free 2 was the first chopper show I’d ever attended, so it’s an honor to get the nod to be an invited builder this year.
This bike is sentimental to me as I got it off a close friend / mentor / local legend, Steve Rebuck. I’m trying to use as many of his old parts as possible, along with some neat pieces from new friends.
It’ll have dual carb heads, an early cast Morris mag, a mid war XA springer, 52 Hummer tank, OG ribbed fender, Borrani / Akront 21/18 laced to mid star hubs, and a hardtail cut from a methed up 1953 Pan frame - grafted to the 71 FLH neck to retain the VIN.
My goal in all this is to build a stripped down hot rod shovelhead I can beat into the ground when all this is over.
@bornfreeshow #bornfree #bornfree18 #BF18invitedbuilder #bornfreemotorcycleshow
13 Nov 2026
#bf18invitedbuilder Friday update
A sampling of some of the parts going onto this year’s @bornfreeshow bike. I have loved Sportsters, particularly the early 900s for the entire time I’ve been into this stuff, so I’m super stoked to be building a high finish, high function ‘66 XLCH with all the cool Sportster touches I can throw at it.
I’ve been holding onto some of these parts for years and I’m honestly so excited to open these NOS bags for the first time since they were sealed at the factory and put the parts on the road.
13 Nov 2026
#bf18invitedbuilder @trustearth_
First things first, I had to check out what we have in stock. I grabbed a frame I bought a few years ago with some molding on it already but I'm going to have to re do most of it but its a nice straight leg frame, so thats the base. The heart of my project is going to be this 1949 motor I have had set aside for a rainy day. And the day has come. Its polished, fully rebuilt, beautiful motor. I need to get a chrome oil pump and I am going to chrome a linkert for it as well. I am planning to make the pipes, the controls, handlebars, a bunch of smalls and do all the filler work as well. My big goal is to delete the oil bag. I am running a hummer tank that I'll split and run oil on one side, and gas on the other. I have a stepped star hub just becuase that will get fresh chrome, fresh rebuilt and laced to a Kelsey Hayes 18 rim for the rear. Front is still TBD. My goal is to produce something I am proud of, use what I already have, and make what I don't (or get some of my extremely talented friends to help me make them). I would like to use as few out of the box parts as possible and just create something cool, classic, and timeless. I am hoping my love for these old things shines through, and I am mostly hoping i just make it by the deadline, haha. Thanks for following along.
#bf18 #bornfree18 #bornfree #bornfreeshow
@harleydavidson @805beer @russbrownmotorcycleattorneys
13 Nov 2026
#bf18invitedbuilder @lehangar23 -
Making some spacer for this 1920's Harley Davidson pea shooter front end I'm going to run on my Triumph pre unit show bike. I was able to sneak this small hub inside the forks but I didn't like the bearings showing so I made these spacers/dust covers to clean it up a little
#bf18 #bornfree18 #bornfree #bornfreeshow
@harleydavidson @805beer @russbrownmotorcycleattorneys
13 Nov 2026
Well here is the start. 1956 Panhead as the heart of the build. 1956 is my Dads birthday year so it was only fitting for me as a tribute to him since he got me into motorcycle and changed my life forever. Still cooking up ideas for this @bornfreeshow build. #bornfree18 #bornfreeinvitedbuilder
12 Nov 2026
#bf18invitedbuilder @chadhubman -
I built this engine a few years ago for myself. I put it in my blue bike as a familiar run stand to verify all my “precision guesswork” as slim @slimsfab calls it, turns out I was right on! IT RUNS BETTER THAN MY OTHER BIKES And pulls like a strong shovelhead! Im really not into weird combo engines unless they perform in all ways as good or better than any one of these three engines would. So I put 600 miles on it and pulled it apart + everything looked great in there + started polishing for plating! I ground down some mini carbide burrs and polished up DEEP between those fins! I’m gonna do the iron parts in nickel and the aluminum will be polished then I got a few more little plating tricks you’ll see when it all goes together! I’ll talk more about this engine coming up here in a month n some.
#bf18 #bornfree18 #bornfree #bornfreeshow
@harleydavidson @805beer @russbrownmotorcycleattorneys
12 Nov 2026
#bf18invitedbuilder @sikdalton -
i’ve been toying with this and the idea for awhile. everyone loves a molded bike. how about a molded in engine case. long time ago. my buddy @rweber007 had a center steel section. i was instantly like i’d weld that in , he gave me the history of why they would do it. when guys would race quarter midgets. and stroke knuckle heads and run water cooled knuckle top ends they needed more clearance. for stroke and more strength since they would throw rods and so on. so they did this. well one day ron surprised me he had one cut out of a 5” plate for me. and he decked it. i took a right case and added some material to the edges and fitted it. kinda got goin on it and life got in the way. and i guess i became a cowboy. as some say. well i dug this back out so be ready for it. will be true to my style and our local style.
#bf18 #bornfree18 #bornfree #bornfreeshow
@harleydavidson @805beer @russbrownmotorcycleattorneys
11 Nov 2026
Quick little introduction for my Born Free build this year.
Doing a pretty much stock Pan head geometry frame. All stainless steel, single down-tube, and polished up. Got a lot of work and time to put into the frame and the sheetmetal so the 61 FLH drivetrain is getting sent out for the machine work, chrome, and polish. I’m really wanting to build a low, tight and narrow bike. Theres a lot of late 50’s early 60’s style bikes and Japanese builders that have really helped me build the style and looks I’m going for. Hard to say I’m building anything era specific with a stainless single down tube frame but it makes sense in my mind. Just going to throw my own weird style into the mix.
My end goal for this build is to have a bike I enjoy Monday after the show equally as much as Sunday during the show.
Huge Thanks to everyone that has gave me support and a hand getting to this place! This means a-lot to me. Ready to get at it.
@bornfreeshow #bf18invitedbuilder #bornfree #bornfreemotorcycleshow #bornfree18
11 Nov 2026
#bf18invitedbuilder @chadhubman -
Here’s where I started. Upside down VL axle plates and this engine I built a while back from there I had no plan and im making sure to not be influenced by anything for this build. So that being said I simply built my motor and transmission their own stand and set heights and angles to give me just enough to swoop up from the vl axle plates to a 6” up + 0” out neck is where it would land. Started bending up tubing! So Instead of following my favorite recipe of my favorite Panhead I saw someone build in the past, I’m gonna keep following shapes and lines and letting things flow and compliment what’s already there. And do the same thing to the next piece not locking anything down fully till I see the rest of it.
#bf18 #bornfree18 #bornfree #bornfreeshow
@harleydavidson @805beer @russbrownmotorcycleattorneys
10 Nov 2026
Born Free 2027. LFG!
We’re back in the garage baby! 👋 My name is Brittany Conard. Last year I built my first bike, Little Miss Sunshine, a tough 1970s chopper, for @biltwell_peoples_champ , and it was one of the best experiences. This is my first Born Free invite and I’m beyond excited to get this party started.
And same as last year, calling out the elephant in the room: I’m Jacob Conard’s wife, and I’m building out of the home shop we share. Transparency matters to me, so you’ll see all of the work as it happens from start to the first ride. Hope you are excited to learn along with me 😅
This time I’m going a little different: a 1948 Harley 45” flathead, drivetrain and WL frame. I couldn’t be more stoked on what I chose.
This motor comes from an era when a woman couldn’t get a loan in her own name. This won’t be a period-correct restoration. It’s my build, my style, while trying to pay a little respect to the pioneers who rode these first.
The bike’s with a good friend right now and lands in my hands in a few weeks. I want to see it in person before locking my front end in, but trust me, we’re brewing some good shit.
New project, new spreadsheet, same nerd. Time to cook 👩🍳 Stay tuned.
@bornfreeshow #bornfree #bornfree18 #BF18invitedbuilder #bornfreemotorcycleshow
09 Nov 2026
#bf18invitedbuilder @esoteric_speed -
Born-Free Bike Frame.
This frame started as a cheap swap-meet find. Had it sitting on the shelf for far too long, so I finally had to pull it down and chop it up.
It started life as a ‘25 JD frame, which I personally think has one of the better-looking neck castings Harley-Davidson ever made. Unlike the VL frame, it’s nearly impossible to fit an OHV Big Twin into the JD geometry. So, it got cut up and scavenged for the good parts, which ultimately came down to the neck and transmission plate.
The axle plates were roached, so I picked up some VL axle plates at the swap. Everything was de-tubed and then re-tubed, but instead of going the standard lugged route, I machined tapered transitions for a molded frame aesthetic.
Everything tapers and transitions seamlessly, with an odd combination of 1.5”, 1.25”, 1.125”, and 1” tubing.
At this point, I’m pretty set on getting it chromed. I’ve always thought a paintless, molded bike would be a cool visual, mostly because Bondo absolutely sucks.
There will be no country bar or upper motor mount. I want to keep everything looking as skeletal as possible.
More to come.
#bornfree #bornfree18 #bornfreemotorcycleshow
09 Nov 2026
Follower tracking
We have started recording @bornfreeshow, but only 1 observation so far — not enough to show a trend yet. Track it daily →
Download @bornfreeshow's data
Everything below is derived from this account, priced on the counts shown. Delivered as CSV by emailed link.
You only pay for rows we deliver. Counts are the maximum available today; if an export comes back smaller, the difference is refunded automatically. Counts as last collected 1 day, 5 hours ago.
Tracking
A monthly plan, not a download: we keep reading @bornfreeshow and email you what changed.
Other reports
Not downloads of this account: they take their own inputs.
Similar accounts
Accounts we track that share hashtags, mentions or bio topics with @bornfreeshow.
@kvnpak
5,849 followers
Also uses #bornfreeshow
@beware_choppers
24.3K followers
Also uses #bf18invitedbuilder
@anchormoto
12.1K followers
Also uses #bornfreeinvitedbuilder
@triumphsantamonica
2,003 followers
Also mentions @russbrownmotorcycleattorneys
@anthony73robinson
23.1K followers
Also uses #bornfreeshow
@ridetothewarehouse
6,285 followers
Also mentions @russbrownmotorcycleattorneys
@motobeachclassic
13.3K followers
Also mentions @russbrownmotorcycleattorneys