19.5K
Followers
3,945
Following
313
Posts
N/A
Reels
5
Highlights
6/6
Photos/Videos in last 12
Bio
The #1 lighting control app đź’ˇ Used in film, TV, corporate, events, and worship Trusted by crews around the world
Links
social.blackout-app.com-
Avg likes
-
Avg comments
-
Engagement
0.2/wk
Posting
Likes and comments are still being collected for this account. Check back shortly.
Recent posts
Blackout v3 is live. Missed the livestream? No worries.
The YouTube replay is up and ready to when you are.
Here's what changed:
FX ENGINE
Rebuilt from scratch. The most powerful effects tool we have ever shipped, and the one you can actually see: draw a movement or a color path with your finger and watch the rig follow it.
PIXEL MAPPING
Built right into the console. One unified pixel mapper, no more stitching two systems together mid-show. We pulled this off once with LivePlot. Trust me on this one too.
LIVEPLOT + QUICKPLOT
Run multiple plots at once. Share to your crew by QR code so your gaffer watches the rig change on their own phone and calls it by sight, not by number.
QUICKHUDS
Try this one first. We went through every tap and drag in the console, asked what it was costing you, and cut it. Fewer presses to the thing you need, mid-show, without looking. Invisible until you're on the floor. Then it's the only thing you notice.
THE INTEGRATIONS YOU CANNOT GET ANYWHERE ELSE
Native Astera fixture config and live battery telemetry inside the console. Cerise and Stardust. Lit Duo 1 color matching: point the meter at any source and your fixtures match what it measured.
45,000+ HUMAN-VERIFIED PROFILES
A person opened the manufacturer's chart, patched the fixture, and drove every parameter until it matched. Some of you keep Blackout open just to copy our profile into the desk you're renting, by hand. There's no better thing anyone could say about a library.
See the console running and hear why we built it the way we did. Link to YouTube channel in bio.
#blackoutapp
07 Oct 2026
Five DMX setup mistakes that cost you time on every production.
1. Fixture modes matter more than you think. Every fixture has multiple DMX modes that determine channel count and behavior. Patching without checking the mode first means your fixtures won’t respond correctly to control data. Verify the mode in the fixture manual before patching and save yourself the troubleshooting headache later.
2. Cable management isn’t just about safety. Loose DMX runs create trip hazards, sure, but they also cause signal issues that slow down your workflow. Label your runs, secure cables with ties or tape, and keep lines organized. A clean cable run prevents signal loss and makes troubleshooting faster when problems arise. Or skip the cables entirely and go wireless.
3. Network organization becomes critical as your setup scales. Running Blackout with just your iPad and console keeps things simple. Once you start building bigger networks with multiple nodes and devices, static IP addresses in an easy-to-recall scheme become essential. Write them down in a spreadsheet for your whole lighting control crew. You’ll thank yourself when troubleshooting begins.
4. Simple setups win. Adding extra layers, nodes, or complex routing creates more failure points and makes your system harder to troubleshoot. The cleanest signal path usually works best. Keep it as simple as possible while still meeting production needs.
5. Test before cameras roll. Skipping testing means discovering problems when time matters most. Verify addresses, check signal flow, and make sure every fixture responds correctly before production starts. Even if you’re prepping 20 SkyPanels, it’s worth flashing through every single one from your console to confirm you have control over every attribute. Five minutes of testing saves hours of troubleshooting.
These mistakes are easy to avoid once you know what to watch for.
Watch our full 10-minute guide on YouTube to see everything Blackout can do, from patching to programming to workflow automation. youtube.com/@blackoutapp
blackout-app.com
📸
@n8cine
Cris Satz
@mattiolo.dp & @lmc.vision
@lightboxco
@p.a.light
#blackoutapp #lightingconsole #lightingprogr
15 Jun 2026
DMX is the standard lighting protocol that lets you talk to your lights. Each DMX universe has 512 channels, with values from 0–255 controlling everything from dimmer to color, temperature, tint, RGB, crossfade, and more. Different fixture modes can condense channels or even allow 16-bit control, letting you fine-tune movements or color with 65,536 steps instead of just 256.
When you need to control multiple universes or run long cable distances, Art-Net and sACN come into play. These are DMX-over-Ethernet protocols that can transmit hundreds, or even thousands of universes over a single cable, reducing the mess of XLR runs on large setups.
For wireless setups, CRMX, WDMX, Show DMX, and other systems replace physical cables, letting you transmit DMX to multiple receivers. Many modern lights, like ARRI Skypanels, Astera Titan Tubes, Creamsource Vortex8s, and LiteGear Litemats, already have receivers built in, so wireless DMX is plug-and-play.
Understanding these protocols allows you to run large, complex lighting setups efficiently and professionally, whether wired or wireless, single universe or multi-universe.
Found this helpful? Check our Youtube channel: youtube.com/@blackoutapp for more Blackout tutorials and insights!
#DMX #ArtNet #sACN #LightingTech #FilmLighting #BlackoutApp #WirelessDMX #CinematographyTips #SetLife #LightingControl #lightingconsole #lightingprogrammer
17 Nov 2025
Did you know your groups can build themselves? đź§
Smart Groups are new in V3. Filter by fixture type, label, universe or manufacturer, and the group stays up to date as you patch and unpatch. Make one for every battery unit on the truck and stop updating it by hand.
Swipe to watch 👉 Tips from @ian.s.peterson
#BlackoutLightingConsole #SmartGroups #LightingConsole #Gaffer #DidYouKnow
14 Nov 2026
Did you know you can add fixtures to LivePlot from the command line? ⌨️
Select a group, hit Update, choose LivePlot, and they all appear. Then grid them, stack them, make them circles and spread them out. Done.
Swipe to watch 👉 Tips from @ian.s.peterson
#BlackoutLightingConsole #LivePlot #LightingConsole #Gaffer #DidYouKnow
13 Nov 2026
Did you know one fader can control the speed of a whole bunch of effects? 🎚️
Speed Masters are new in Blackout 3.4. Load a fader, open the new Speed tab, and pick the effects it controls. Choose Scale, BPM (with a tap tempo button) or Total Time, and add buttons for preset speeds like 100% or 50%.
Swipe to watch 👉 Tips from @ian.s.peterson
#BlackoutLightingConsole #LightingEffects #LightingConsole #LightingDesign #DidYouKnow
12 Nov 2026
Did you know your fixtures can react to audio? 🔊
Build a PixelMap, add some media, and turn on audio input. Bind any media parameter to the bass or the beat, then tune the gain, threshold, attack and release until it moves the way you want. You can even stack several parameters.
Swipe to watch 👉 Tips from @ian.s.peterson
#BlackoutLightingConsole #PixelMapping #AudioReactive #LightingDesign #DidYouKnow
11 Nov 2026
Two free things for every lighting tech, whatever console you run 👇
The Lighting Pro Directory is a free public map of gaffers, programmers, board ops, designers and trainers. Add your city, your roles and the consoles you run, and productions near you can find you and reach you right from your card.
And today we're opening Learn: full guided courses from your first patch through effects and pixel mapping, with a quiz after every section and a simulator to learn the command line. Blackout 101, Effects, Pixel Mapping, Connecting Your Rig and Explore Blackout v3 are all free right now, and every course you pass earns a badge that helps you stand out on the map.
Get on the map and take a course. Links in bio.
#lightingdesign #lightingprogrammer #lightingconsole #blackoutapp
23 Oct 2026
Playing with 4096 pixels over 24 Universes in Blackout v3!
Each of the 4096 pixels has a Red, Green, and Blue channel. 12,288 is a lot of channels but Blackout makes it easy!
19 Oct 2026
Own a Blackout v2 license? You've got the full Command tier of v3 on it right now — pixel mapping, the effects engine, Lit Duo color matching, the whole console.
No card. Nothing to cancel. Your v2 license is perpetual and this doesn't touch it.
It runs out Wednesday 21 October, so take it out this weekend.
Link in bio.
16 Oct 2026
24 hours from now, we show you v3 live.
The Live Launch Event is where you see what changed and what it does, with the console running in front of you.
Tuesday, October 6
9:00 AM PT / 12:00 PM ET / 16:00 UTC
The new era for lighting consoles starts tomorrow.
Register now. Link in bio.
#blackoutapp
05 Oct 2026
Legacy consoles had a good run.
Blackout v3 is the new standard, and you can see it for yourself at our Live Launch Event.
Tuesday, October 6
9:00 AM PT / 12:00 PM ET / 16:00 UTC
If you ran v2, this is your next console. If you haven’t tried Blackout yet, this is where you start.
Register now. Link in bio.
#blackoutapp #lightingconsole #lightingprogrammer
02 Oct 2026
Follower tracking
We have started recording @blackoutlightingconsole, but only 1 observation so far — not enough to show a trend yet. Track it daily →
Download @blackoutlightingconsole's data
Everything below is derived from this account, priced on the counts shown. Delivered as CSV by emailed link.
You only pay for rows we deliver. Counts are the maximum available today; if an export comes back smaller, the difference is refunded automatically. Counts as last collected 3Â hours, 47Â minutes ago.
Tracking
A monthly plan, not a download: we keep reading @blackoutlightingconsole and email you what changed.
Other reports
Not downloads of this account: they take their own inputs.
Similar accounts
Accounts we track that share hashtags, mentions or bio topics with @blackoutlightingconsole.
@esun.light
785 followers
Also mentions @p.a.light
@josef_beyer
21.7K followers
Also uses #blackoutapp
@christianepps
4,765 followers
Also uses #lightingtech
@alexis.gouv.gworks
2,877 followers
Also uses #lightingconsole
@bear.bulb
967 followers
Also uses #wirelessdmx
@greenkitlondon
2,500 followers
Also uses #lightingtech
@dlux.rentals
1,594 followers
Also uses #filmlighting